Products of HA Series could achieve the concentration of metals from acid solution that contains sulfuric acid of less than 20% and phosphoric acid of less than 30%, as well as the purification of acid liquor. The membrane element could maintain high-flux and stable operation for more than 12 months in strong acid conditions.

 

Table 1-1: Parameter of Acid Resistant NF Membrane Element

 

Product Model	Average Flow Rate GPD(m3/d)	Average Retention Rate
HA-NF33-4040	4300(16.3)	98.0%
HA-NF34-4040	3400(12.9)	98.0%
HA-NF43-4040	4800(18.2)	96.0%
HA-NF44-4040	3800(14.4)	96.0%
HA-NF33-8040	18200(68.9)	98.0%
HA-NF34-8040	14200(53.7)	98.0%
HA-NF43-8040	20400(77.2)	96.0%
HA-NF44-8040	16000(60.6)	96.0%

 

· After operating for 24 hours, measure the average rate of desalination. Fluctuation range of flow for a single membrane element is +25%/-25%.

· Measure Condition: solution of 2,000ppm MgSO₄, 580psi of operating pressure, 25℃ of temperature, pH7 and 15% of recovery rate.

  

 

Table 1-2: Parameter of Acid Resistant and High Pressure UF Membrane Element

 

 

Product Model	MWCO (Dalton)	Average Flow Rate, GPD (m3/d)
HA-UF33-4040	2500	4300(16.5)
HA-UF34-4040	2500	3550(13.4)
HA-UF33-8040	2500	18250(69.1)
HA-UF34-8040	2500	14250(53.9)

 

· After operating for 24 hours, measure the average rate of desalination. Fluctuation range of flow for a single membrane element is +25%/-25%.

· Measure Condition: general specification based on pure water, 580psi of operating pressure, 25℃ of temperature, and 10% of recovery rate.

 

Table 1-3: Parameter of Acid Resistant and Low Pressure UF Membrane Element

 

Product Model	MWCO  (Dalton)	Average Flow Rate, GPD (m3/d)
HA-UF43-4040	10000	1850(7.0)
HA-UF44-4040	10000	1400(5.3)
HA-UF43-8040	10000	7700(29.1)
HA-UF44-8040	10000	6050(22.9)

 

· After operating for 24 hours, measure the average rate of desalination. Fluctuation range of flow for a single membrane element is +25%/-25%.

· Measure Condition: general specification based on pure water, 30psi of operating pressure, 25℃ of temperature, and 10% of recovery rate.

 

Table 2: Size and Weight

 

Product Model	Size, inch (cm)			Weight
	A	B	C	(kg)
HA-NF33-4040	40	0.75	3.9	6
	101.6	1.9	9.9
HA-NF34-4040	40	0.75	3.9	6
	101.6	1.9	9.9
HA-NF43-4040	40	0.75	3.9	6
	101.6	1.9	9.9
HA-NF44-4040	40	0.75	3.9	6
	101.6	1.9	9.9
HA-NF33-8040	40	1.125	7.9	16
	101.6	2.86	20.1
HA-NF34-8040	40	1.125	7.9	16
	101.6	2.86	20.1
HA-NF43-8040	40	1.125	7.9	16
	101.6	2.86	20.1
HA-UF33-4040	40	0.75	3.9	6
	101.6	1.9	9.9
HA-UF34-4040	40	0.75	3.9	6
	101.6	1.9	9.9
HA-UF33-8040	40	1.125	7.9	16
	101.6	2.86	20.1
HA-UF34-8040	40	1.125	7.9	16
	101.6	2.86	20.1
HA-UF33-4040	40	0.75	3.9	6
	101.6	1.9	9.9
HA-UF44-4040	40	0.75	3.9	6
	101.6	1.9	9.9
HA-UF43-8040	40	1.125	7.9	16
	101.6	2.86	20.1
HA-UF44-8040	40	1.125	7.9	16
	101.6	2.86	20.1
HA-NF44-8040	40	1.125	7.9	16
	101.6	2.86	20.1

 

Table 3: Operation and Cleaning Parameters

 

Product Model	HA-NF3	HA-NF4	HA-UF3	HA-UF4
Max Operating Pressure	1000psi	580psi	580psi	145psi
Pressure Drop of Single Membrane	<8psi	<8psi	<8psi	<8psi
Recovery	15%	15%	15%	15%
Max Operating Temperature	80℃	50℃	50℃	50℃
Max Cleaning Temperature	80℃	50℃	50℃	50℃
PH Range of Continuous Working	0-12	0-12	0-12	0-12
PH Range of Cleaning	0-13	0-13	0-13	0-13
Allowable Maximum Contents of Residual Chlorine	500ppm-hours	500ppm-hours	500ppm-hours	500ppm-hours
Inlet Water	NTU<1	NTU<1	NTU<1	NTU<1
	SDI<5	SDI<5	SDI<5	SDI<5

 

Storage Condition
1. Before the first use, all membrane elements must be stored under the original packaging conditions.
2. Store in a cool, dry and the place that is not directly exposed to sunlight or artificial lighting. Storage temperature stays at 0℃ to 30℃, and the longest storage time is 6 months.