Products of HS Series are suitable for the coexistence of organic solvent and water, and it adopts hydrophilic membrane material. Extraction, recovery of the solvent and reduce the difficulty of wastewater treatment and energy consumption could be conducted, and in the following solvents, it can be normally operated for 12 months. 

Methanol, alcohol, isopropyl alcohol, ethylene glycol, acetonitrile, acetone, ethyl acetate, dichloromethane, n-hexane, THF, NMP, DMF, DMA, DMSO and toluene.

  

Table 1-1 Parameter of Organic NF Membrane Element

 

Product Model	Average Flow Rate GPD(m3/d)	Average Retention Rate
HS-NF13-4040	4300(16.3)	98%
HS-NF14-4040	3300(12.5)	98%
HS-NF23-4040	4800(18.2)	96%
HS-NF24-4040	3700(14.0)	96%
HS-NF13-8040	18200(68.9)	98%
HS-NF14-8040	14200(53.7)	98%
HS-NF23-8040	20400(77.2)	96%
HS-NF24-8040	15900(60.2)	96%

 

· After operating for 24 hours, measure the average rate of desalination. Fluctuation range of flow for a single membrane element is +25%/-25%.

· Measure Condition : MgSO₄ solution of 2,000 ppm, 580psi of operating pressure, 25℃ of temperature, pH7and 15% of recovery rate.

 

Table 1-2: Parameter of Organic UF Membrane Element

 

Product Model	MWCO (Dalton)	Average Flow Rate, GPD (m3/d)
HS-UF13-4040	2500	5100(19.3)
HS-UF14-4040	2500	4000(15.1)
HS-UF13-8040	2500	18250(69.1)
HS-UF14-8040	2500	14250(53.9)

 

· After operating for 24 hours, measure the average rate of desalination. Fluctuation range of flow for a single membrane element is +25%/-25%.

· Measure Condition : general specification based on pure water, 30psi of operating pressure, 25℃ of temperature, and 10% of recovery rate.

 

Table 1-3: Parameter of Organic UF Membrane Element

 

Product Model	MWCO (Dalton)	Average Flow Rate, GPD(m3/d)
HS-UF23-4040	10000	1850(7.0)
HS-UF24-4040	10000	1400(5.3)
HS-UF23-8040	10000	7700(29.1)
HS-UF24-8040	10000	6050(22.9)

 

· After operating for 4 hours, measure the average rate of desalination. Fluctuation range of flow for a single membrane element is +25%/-25%.

· Measure Condition : general specification based on pure water, 30psi of operating pressure, 25℃ of temperature, and 10% of recovery rate.

 

Table 2: Size and Weight

 

 

Product Model	Size,inch(cm)						Weight
	A		B		C		(kg)
HS-NF13-4040	40		0.75		3.9		6
	101.6		1.9		9.9
HS-NF14-4040	40		0.75		3.9		6
	101.6		1.9		9.9
HS-NF23-4040	40		0.75		3.9		6
	101.6		1.9		9.9
HS-NF24-4040	40		0.75		3.9		6
	101.6		1.9		9.9
HS-NF13-8040	40		1.125		7.9		16
	101.6		2.86		20.1
HS-NF14-8040	40		1.125		7.9		16
	101.6		2.86		20.1
HS-NF23-8040	40		1.125		7.9		16
	101.6		2.86		20.1
HS-UF13-4040	40		0.75		3.9		6
	101.6		1.9		9.9
HS-UF14-4040	40		0.75		3.9		6
	101.6		1.9		9.9
HS-UF13-8040	40		1.125		7.9		16
	101.6		2.86		20.1
HS-UF14-8040	40		1.125		7.9		16
	101.6		2.86		20.1
HS-UF23-4040	40		0.75		3.9		6
	101.6		1.9		9.9
HS-UF24-4040	40		0.75		3.9		6
	101.6		1.9		9.9
HS-UF23-8040	40		1.125		7.9		16
	101.6		2.86		20.1
HS-UF24-8040	40		1.125		7.9		16
	101.6		2.86		20.1
HS-NF24-8040	40		1.125		7.9		16
	101.6		2.86		20.1

 

Table 3: Operation and Cleaning Parameters

 

Product Model	HS-NF1	HS-NF2	HS-UF1	HS-UF2
Max Operating Pressure	1000psi	580psi	580psi	145psi
Pressure Drop of Single Membrane	<8psi	<8psi	<8psi	<8psi
Recovery	15%	15%	15%	15%
Max Operating Temperature	60℃	50℃	50℃	50℃
Max Cleaning Temperature	60℃	60℃	60℃	60℃
PH Range of Continuous Working	2.0-12.0	2.0-12.0	2.0-12.0	2.0-12.0
PH Range of Cleaning	1.0-12.0	1.0-12.0	1.0-12.0	1.0-12.0
Allowable Maximum Contents of Residual Chlorine	500ppm-hours	500ppm-hours	500ppm-hours	500ppm-hours
Inlet Water	NTU<1	NTU<1	NTU<1	NTU<1
	SDI<5	SDI<5	SDI<5	SDI<5

 

Storage Condition

1. Before the first use, all membrane elements must be stored under the original packaging conditions.
2. Store in a cool, dry and the place that is not directly exposed to sunlight or artificial lighting. Storage temperature stays at 0℃ to 30℃, and the longest storage time is 6 months.